Blog
What Is The New Hyster General Purpose Forklift?
The new Hyster General Purpose Forklift series comprises diesel-powered, internal combustion counterbalance trucks designed for versatile material handling. Key models like the H3.5XT and H2.0-3.5UT feature pneumatic tires, load capacities from 2-12 tons, and optimized stability with 20 km/h max speeds. These Tier IV-compliant machines prioritize durability in demanding industrial environments while maintaining ERGONOMIC operator cabins and 54 cm/sec lifting speeds for rapid pallet cycling.
How to Determine the Model Year of Your Toyota Forklift
What defines Hyster’s General Purpose Forklift design?
Hyster’s design centers on heavy-duty chassis construction and vertical mast configurations supporting 3,390 kg base weights. The H3.5XT model features a 45 kW diesel engine with torque reserves for ramp climbing, while the 540 mm load center maintains stability during high lifts. Pro Tip: Always verify ground clearance (125+ mm) when selecting pneumatic vs. cushion tire options for outdoor/indoor transitions.
These forklifts employ ZF axles with mechanical wet brakes providing 30% longer service intervals than drum systems. The ROPS/FOPS-certified cabin integrates 360° visibility through curved glass and low-vibration mounts. For example, the H5.0UT6 variant handles 5-ton loads across gravel surfaces using its 28″ front tires and limited-slip differential. Importantly, the load-sensing hydraulics automatically adjust pump flow to match operational demands—reducing fuel consumption by 18% during partial-load scenarios.
How do Hyster GP models handle different load capacities?
The series scales from 2-12 tons using modular counterweight systems and reinforced mast channels. Smaller units (H2.0UT) employ single-stage masts for 3.5m lifts, while 10+ ton models use triple-stage designs reaching 6m. Practically speaking, the H8.0-6UT’s dual fuel tanks enable 12-hour shifts without refueling—crucial for port operations.
| Model | Capacity | Lift Height |
|---|---|---|
| H3.0XT | 3T | 4.2m |
| H7.0UT6 | 7T | 5.8m |
Torque curves are tailored across the range—the H12-6UT’s turbocharged engine delivers 420 N·m from 1,600 RPM for smooth container handling. However, remember that maximum capacity decreases 8% per meter of lift height beyond 3m. Always consult load charts for height-specific limitations.
What distinguishes the H3.5XT from other GP models?
The H3.5XT specializes in multi-surface agility with its 28″ front/18″ rear tire combination, achieving 85% gradeability on paved slopes. Its 3.9L engine combines SCR and DOC emissions systems to meet EU Stage V standards—a critical upgrade from previous Tier III models. Pro Tip: The rear-axle oscillation design requires bi-annual pivot lubrication when used in high-dust environments.
Redway Battery Expert Insight
How to Determine the Year of Your Forklift by Serial Number
FAQs
Can these forklifts handle freezer warehouses?
Yes, when equipped with cold-start packages (-30°C) and LO-ET fuel additives. However, mast lubrication intervals shorten to 150h in sub-zero conditions.
What is the new Hyster general-purpose forklift?
The new Hyster general-purpose forklifts include the A Series and UT Series. The A Series is customizable with electric and internal combustion options, offering high energy efficiency and a Dynamic Stability System (DSS). The UT Series provides reliable, lower-cost options with diesel, LPG, or dual-fuel engines, ideal for less demanding operations.
What are the features of the Hyster A Series forklift?
The Hyster A Series forklifts are highly customizable using “A+ Logic” to meet specific customer needs. Available in both electric and internal combustion models, they offer scalable features, energy efficiency, and advanced safety systems like Dynamic Stability System (DSS) for improved performance.
What is the Hyster UT Series forklift designed for?
The Hyster UT Series is designed for simpler, more cost-effective operations, particularly for lower-intensity tasks. It offers a variety of fuel options, including diesel, LPG, or dual-fuel engines, and provides a low cost of ownership while ensuring reliability and durability.
What capacity range do the Hyster general-purpose forklifts cover?
The Hyster general-purpose forklifts cover a wide range of capacities. The UT Series offers forklifts with capacities ranging from 2 to 3.5 tonnes, while the A Series can be tailored to specific operational needs, including both light and heavy-duty tasks.
What other Hyster forklift models are available?
In addition to the A and UT Series, Hyster has introduced the XTLG Series, electric forklifts designed for tough indoor and outdoor environments. They also offer larger 7-9 tonne capacity lift trucks with integrated lithium-ion options for demanding material handling operations.