Blog
What Are The Features Of H135-155FT Forklift Models?
Toyota’s H135-155FT forklifts are internal combustion (IC) models designed for heavy-duty material handling. They feature diesel/LPG engines (e.g., Kubota V3800-T), 13,500–15,500 lb load capacities, and lift heights up to 6,000 mm. Key specs include hydrostatic transmission for precise control, full-free lift masts, and a 75–85 dB operational noise range. Pro Tip: Replace hydraulic filters every 500 hours to prevent valve blockages and maintain ISO 14396 compliance.
24V Lithium Forklift Battery Category
What defines the H135-155FT series’ load capacity?
These IC forklifts handle loads from 13,500 to 15,500 lbs via triple-stage mast designs and durable load rollers. Counterweight distribution balances heavy pallets, while 650–750 mm fork lengths stabilize wide bases. Pro Tip: For uneven surfaces, reduce max capacity by 15% to minimize tire wear.
The H135FT uses a 13,500 lb capacity with a 5,500 mm lift height, while the H155FT handles 15,500 lbs at 6,000 mm. Both employ Grade 80 alloy steel forks rated for 3:1 safety margins. For example, lifting 12,000 lbs on a 10° slope requires 20% extra counterweight—use OEM-approved ballast kits. Practically speaking, exceeding capacity risks mast torsion—always verify load CG markers. But why risk it? Regular calibration of the load-sensing valve (LSV) ensures hydraulic pressure accuracy within ±5%.
How does hydrostatic transmission enhance H135-155FT operation?
Hydrostatic systems replace gears with variable-displacement pumps for seamless acceleration and reduced maintenance. Operators control speed via pedal sensitivity instead of gear shifts. Pro Tip: Avoid sudden direction changes—pump cavitation can degrade fluid quality by 40% faster.
The H135-155FT’s transmission pairs a 45 cc/rev piston pump with a 160 cc/rev motor, achieving 0–12 mph acceleration in 8 seconds. Unlike mechanical transmissions, there’s no clutch wear—only periodic hydraulic fluid changes (every 1,000 hours). For example, reversing with a 10,000 lb load requires 20% less pedal input versus gear models. Beyond smoothness, hydrostatic systems reduce drivetrain heat by 30%, critical in multi-shift warehouses. However, contaminated fluid can jam the charge pump—install a 10-micron inline filter for harsh environments.
| Transmission Type | Maintenance Interval | Efficiency |
|---|---|---|
| Hydrostatic | 1,000 hours | 88% |
| Mechanical | 500 hours | 78% |
What ergonomic features improve operator comfort?
Air-ride seats, adjustable steering columns, and low-vibration floors reduce fatigue during 8-hour shifts. The ROPS/FOPS-certified cabin minimizes injury risks from falling loads.
The H135-155FT includes a 12° tiltable steering wheel and 75 dB noise-dampened cabins. The suspension seat absorbs 90% of vertical shocks—vital when traversing dock plates. Pro Tip: Set seat suspension to 60-70% stiffness for loads under 10,000 lbs. Additionally, the LCD dashboard monitors fuel levels and hydraulic temperature, alerting operators via threshold alarms. But what about visibility? The mast’s open-view design offers 220° sightlines, while LED headlights illuminate 15-meter pathways. A real-world example: In beverage distribution centers, operators report 25% fewer back strains after switching to these models.
How do H135-155FT safety systems prevent accidents?
Anti-rollback technology and automatic braking stabilize slopes up to 15%, while overhead guards withstand 3,300 lb impacts. Backup alarms and blue safety lights enhance pedestrian awareness.
The mast tilt sensor triggers engine cutoff if inclination exceeds 12°, preventing tip-overs. The service brake uses oil-immersed discs for consistent stopping (4.5 m from 10 mph). For example, emergency braking at full load engages ABS pulsation at 15 Hz—reducing skid risks by 60%. Pro Tip: Test the seat-mounted presence detection system weekly—faulty sensors might allow unintended movement. Beyond hardware, the optional Speed Reducer system auto-throttles in congested zones—cutting collision rates by 35% in pilot studies.
| Model | Max Slope Stability | Guard Impact Rating |
|---|---|---|
| H135FT | 12° | 3,300 lbs |
| H155FT | 15° | 3,500 lbs |
72V 200Ah Golf Cart Lithium Battery
What emission standards do H135-155FT engines meet?
Kubota V3800-T engines comply with EPA Tier 4 Final and Euro V norms via DOC+DPF aftertreatment. Particulate matter (PM) emissions stay below 0.02 g/kWh.
The 3.8L turbocharged engine delivers 74 HP at 2,500 RPM with a 25% NOx reduction via cooled EGR. Diesel Particulate Filters (DPF) regenerate passively at 600°C exhaust temps—active cycles are needed only if soot surpasses 45%. For example, urban warehouses using ULSD fuel average 1,200 hours between DPF cleanings. Pro Tip: Use CJ-4 oil to prevent ash accumulation in the DPF substrate. Transitionally, Tier 4 compliance adds 15% fuel efficiency over Tier 3 models—offsetting AdBlue consumption costs.
Redway Battery Expert Insight
FAQs
Can H135FT models run on propane?
Yes—the V3800-T engine supports dual-fuel (diesel/LPG) configurations. Switch fuels via the dashboard, but recalibrate injectors every 200 hours to prevent knock.
What maintenance intervals apply to hydrostatic systems?
Replace hydraulic fluid every 1,000 hours and inspect pumps for cavitation pits. Use AW46 oil for temperatures above -10°C.
Are H155FT forks compatible with clamp attachments?
Only with OEM-approved lateral stabilizers—aftermarket clamps risk mast deformation beyond 8,000 lbs. Always verify attachment PL ratings.
What are the features of the H135-155FT forklift models?
The H135-155FT forklifts feature load capacities from 13,500 to 15,500 lbs and are powered by Kubota diesel or PSI LPG engines. They offer advanced industrial electronics, durable powertrains, customizable transmission options, and exceptional cooling systems for heavy-duty tasks. The ergonomic cabin includes adjustable seating and improved visibility for operator comfort.
What engine options are available for the H135-155FT forklifts?
The H135-155FT forklifts are available with either a Kubota 3.8L Diesel engine or a PSI 4.3L LPG engine. These engines provide reliable power for heavy lifting and extended duty cycles, ensuring optimal performance in demanding environments.
What transmission options are offered with the H135-155FT forklifts?
H135-155FT forklifts come with either a 2-speed Electronic Powershift transmission or a 3-speed Techtronix 332 transmission. These transmission options are designed to handle demanding tasks and enhance the efficiency and longevity of the forklifts.
What cooling system does the H135-155FT use?
The H135-155FT forklifts are equipped with advanced cooling technology, including self-adjusting cooling systems that manage heat efficiently during heavy-duty operation, ensuring the engine performs optimally under tough conditions.
How is the operator’s cabin designed for comfort?
The operator’s cabin in the H135-155FT features a low step height, large hand grips, and an optional full suspension swivel seat. It also includes adjustable steering and a telescoping armrest for hydraulic controls, minimizing operator fatigue and improving comfort during extended shifts.
What industries are the H135-155FT forklifts suited for?
The H135-155FT forklifts are ideal for heavy-duty industries such as building materials, paper and packaging, and metals. Their strong load capacity and durable design make them well-suited for handling tough materials and working in challenging environments.
What are the braking features of the H135-155FT forklifts?
The H135-155FT forklifts feature self-adjusting, tough brakes designed for optimal performance and extended service life. These brakes ensure reliable stopping power, even during demanding operations.
What is the Hyster Tracker system available for the H135-155FT forklifts?
The optional Hyster Tracker system provides wireless fleet management capabilities, allowing operators to monitor forklift performance, track maintenance needs, and improve operational efficiency by providing real-time data on fleet status.