Blog
Can You Put A SOK Battery Rack On Wheels?
Yes, SOK battery racks can be adapted with wheels using compatible mounting hardware and structural reinforcements. Industrial designs like those in battery更换车 (battery replacement vehicles) utilize轨道 (rails) and电池架轮 (battery rack wheels) for mobility. For SOK racks, adding wheels requires installing轮轴 (axles) and securing them with固定件 (fasteners) like bolts or插销 (pins) to maintain stability during movement. Always verify weight capacity and terrain compatibility to prevent tipping or structural stress.
Best Options for Lithium Battery Racks
What components enable wheel installation on SOK racks?
Key components include轮轴 (axles),电池架轮 (wheels), and调节装置 (adjusters). Axles must be welded or bolted to the rack frame, while polyurethane or rubber wheels (80–120mm diameter) handle 150–300kg loads. Pro Tip: Use locking casters on uneven surfaces to prevent unintended movement.
Industrial battery更换车 designs demonstrate that wheel integration demands precision. For example,调节螺丝 (adjustment screws) and螺母 (nuts) in摘要1 allow height alignment between racks and vehicles—critical when docking. Similarly, SOK racks retrofitted with wheels require a minimum ground clearance of 50mm to avoid obstacles. Always distribute weight evenly; a 100Ah lithium battery weighs ~13kg, so a 4-wheel setup needs 52kg capacity. Neglecting load limits risks axle deformation or wheel detachment.
Are pre-made wheel kits available for SOK racks?
Most SOK racks require third-party wheel kits, though some marine-grade battery boxes (e.g., Amazon’s Attwood PowerGuard) include built-in handles/wheels. Universal caster plates with M8 bolt patterns (50x50mm) typically fit SOK rack frames. Warning: Avoid using indoor office casters—opt for heavy-duty 10cm wheels with 360° swivel and brake systems for outdoor use.
| Feature | Industrial Solution | Consumer Retrofit |
|---|---|---|
| Wheel Type | Steel-reinforced rollers | Polyurethane casters |
| Load Capacity | 500kg+ | 50–200kg |
| Installation | Welded axles | Bolt-on plates |
Redway Battery Expert Insight
FAQs
Want OEM lithium forklift batteries at wholesale prices? Check here.
No—drilling or welding is mandatory to attach axle mounts. Use corrosion-resistant sealants on modified areas to prevent structural degradation.
Do wheeled SOK racks comply with safety standards?
Only if certified anchors (e.g., DIN 8958) secure batteries during transit. Unsecured batteries may violate UN38.3 transportation regulations.
How to Dispose Used 18650 Batteries Properly
