Blog
What Are the Key Dimensions and Capacities of the EZGO TXT?
The EZGO TXT golf cart’s dimensions vary by component, with motor assemblies measuring 36-37cm in length and 25-27cm in height/width, while steering gear units occupy 28×13×15cm spaces. Electrical systems feature 36V/48V configurations, with 48V cable harnesses spanning 40cm lengthwise. Key capacities include motor weights of 20.4kg and steering components at 3.25kg, designed for durable load-bearing in golf course terrain.Golf Cart Value Evaluation Guide
What are the physical specifications of EZGO TXT motors?
36V PDS motors for post-2000 models measure 36×25×27cm (L×W×H) weighing 20.4kg, engineered with steel cores for torque delivery up to 2,700 RPM. Later variants feature enhanced 37×25×25.5cm housing with copper windings, improving heat dissipation by 18%.
For perspective, the 20.4kg motor weight represents 22% of the cart’s total drivetrain mass. Pro Tip: Install rubber vibration dampers between motor mounts to reduce noise transmission to passenger compartments.
How does voltage affect component sizing?
48V electrical systems require larger 40×10×5cm cable harnesses versus 36V counterparts, accommodating thicker 6AWG conductors that reduce voltage drop by 1.8V/meter. Critical connections use tinned copper terminals preventing corrosion in humid environments.
| Component | 36V System | 48V System |
|---|---|---|
| Main Cable Length | 35cm | 40cm |
| Conductor Gauge | 8AWG | 6AWG |
Think of 48V wiring as highway lanes—wider paths allow more electron “traffic” flow with less resistance. This explains why 48V reverse switches use 12×7×7cm enclosures versus 10cm³ units in older models.
What are the weight capacities of steering components?
The steering gear assembly (70964G01) measures 28×13×15cm with 3.25kg mass, designed to withstand 450N steering inputs through hardened steel sector gears. Brass bushings in newer models extend bearing life by 300 hours compared to nylon versions.
For reference, 3.25kg steering units support driver inputs equivalent to rotating a 25kg flywheel—a calculation derived from gear reduction ratios. Always check pivot bolt torque specs quarterly to prevent play development.
Redway Battery Expert Insight
FAQs
Only with compatible motor/controller swaps—48V systems demand upgraded 6AWG wiring and higher-capacity solenoids to prevent voltage sag during acceleration.
How long do steering components typically last?
Properly maintained sector gears endure 1,500 operating hours before showing 0.5mm backlash. Replace bushings every 800 hours in sandy environments to prevent excessive wear.
Find Golf Cart Year by Serial Number


