Blog
What Are The Specifications Of J30-40XNT Forklift Models?
The J30-40XNT forklift series encompasses internal combustion (IC) models with load capacities from 3,000 to 4,000 kg, powered by fuel-efficient diesel or LPG engines. Key specs include 3-stage mast lifts (up to 6.5m), 105–115 HP engines, and ergonomic ROPS/FOPS cabins. Advanced variants feature precision hydraulic controls, regenerative braking, and telematics for fleet optimization. Ideal for warehouse and heavy industrial lifting.
24V Lithium Forklift Battery Category
What load capacities do J30-40XNT forklifts offer?
The J30-40XNT series spans 3,000–4,000 kg, with diesel/LPG models optimized for heavy pallet stacking and container handling. Lower-capacity variants (3T) suit narrow aisles, while 4T units handle denser loads like steel coils. Pro Tip: Always factor in load center distance—600mm is standard, but extended centers reduce effective capacity by 15–20%.
Beyond basic weight ratings, J30-40XNT forklifts use reinforced mast designs and dual-stage hydraulic cylinders to maintain stability under maximum loads. For example, the 4T model lifts 4,000 kg at 500mm centers but only 3,400 kg at 900mm. Transitional hydraulic valves prevent “chatter” during precision stacking. Why does this matter? Smooth operation reduces load slippage in freezer warehouses or uneven terrain. Always verify your application’s load profile against the truck’s rated capacity curve.
What engine types power J30-40XNT models?
These IC forklifts use 105–115 HP diesel/LPG engines with liquid cooling and turbocharging for torque-rich performance. Diesel variants excel in outdoor settings, while LPG offers cleaner indoor operation. Tier 4 Final engines reduce particulate emissions by 75% vs. older models.
Practically speaking, the Kubota V3800 diesel engine dominates the series, delivering 112 HP and 385 Nm torque at 1,800 RPM. But what happens if you need rapid refueling? LPG models like the 40XNT-LPG swap tanks in 2 minutes vs. 10+ for diesel refills. However, LPG’s energy density limits runtime to 6–8 hours under heavy use. A warehouse running three shifts might prefer diesel despite higher emissions. Pro Tip: Use synthetic 10W-30 oil to extend engine life in dusty environments.
| Engine Type | HP | Fuel Efficiency |
|---|---|---|
| Diesel | 115 | 3.8 L/hr |
| LPG | 105 | 4.2 kg/hr |
How high can J30-40XNT forklifts lift?
Standard 3-stage masts achieve 6.5m lift heights, while duplex/triplex configurations reach 8m. Free-lift heights of 1.6–2m enable stacking under low ceilings. Heavy-duty roller chains and side-shifters aid precision positioning.
Imagine stacking pallets in a 7m-high rack—the J30-40XNT’s mast extends smoothly via twin hydraulic cylinders guided by lateral rollers. But how do you prevent mast deflection? Structural steel C-channels and 100mm carriage widths minimize sway at full height. Transitional load-sensing hydraulics adjust pump output to match lifting speed, conserving fuel. For cold storage, opt for low-temp hydraulic oils (-40°C rated) to maintain chain lubrication. Pro Tip: Inspect mast rollers quarterly—worn rollers increase friction, accelerating chain wear by 30%.
What maneuverability features do these forklifts have?
4-wheel precision steering and 2.2m turning radii let J30-40XNT models navigate tight aisles. Differential locks enhance traction on gravel, while disk brakes provide 20% shorter stopping distances vs. drum systems.
Beyond the specs, these forklifts use Wagner-style articulated steering for minimal rear-end swing—critical in narrow 3m aisles. But what if you’re handling斜坡? The 40XNT-D’s 20% gradeability ensures stable ascents with 3T loads. Real-world example: A tire factory uses these trucks to move rubber bales up 15° ramps daily.
| Feature | Benefit | Limitation |
|---|---|---|
| 4-Wheel Steering | 2.2m radius | Higher maintenance |
| Disk Brakes | Faster stops | Costlier pads |
96V 100Ah Lithium Battery for Golf Carts
Redway Battery Expert Insight
FAQs
What’s the average cost of a J30-40XNT forklift?
New models range from $35K–$55K, with LPG variants 8–12% pricier than diesel. Telematics and specialized masts add $3K–$7K.
How often do J30-40XNT engines need servicing?
Every 500 hours: oil/filter changes. Hydraulic fluid replaced every 2,000 hours—halve intervals in high-dust environments.
Can these forklifts handle clamp attachments?
Yes, with 400+ kg capacity clamps. Ensure hydraulic flow rates match attachment specs (min. 25 L/min).
What are the specifications of the Hyster J30-40XNT forklift models?
The Hyster J30-40XNT models are three-wheel electric forklifts with load capacities ranging from 3,000 to 4,000 lbs, depending on the model. They feature a max lift height of 259 inches, a 24-inch load center, and a max speed of 9.9 mph. The turning radius varies from 58.3 inches (J30XNT) to 62.1 inches (J35XNT/J40XNT).
What is the power source for the Hyster J30-40XNT forklift?
The Hyster J30-40XNT forklifts are powered by electric batteries. The battery options vary, with the J30XNT using either a 36V / 880Ah or 48V / 660Ah battery, and the J35XNT/J40XNT using either a 36V / 1100Ah or 48V / 770Ah battery, offering flexibility for different operational needs.
What is the turning radius of the Hyster J30-40XNT?
The turning radius of the Hyster J30-40XNT forklift models varies depending on the model. The J30XNT has a turning radius of 58.3 inches, while the J35XNT and J40XNT models have a turning radius of 62.1 inches, making them ideal for tight spaces and narrow aisles.
What is the maximum lift height of the Hyster J30-40XNT forklift?
The Hyster J30-40XNT forklift series offers a maximum lift height of 259 inches, which allows for high-level stacking and racking in warehouses or similar environments, increasing operational efficiency.
What are the operator comfort features of the Hyster J30-40XNT?
The Hyster J30-40XNT is designed for operator comfort with a 3-point entry, an adjustable steering column, a 12-inch steering wheel with a spinner knob, and ergonomic seating options, ensuring ease of use and reduced fatigue during long shifts.
What are the dimensions of the Hyster J30-40XNT forklift?
The Hyster J30-40XNT forklifts have an overall width of 41.2 inches and an overall height (mast lowered) of 6.5 feet (78 inches). The height to the top of the overhead guard is 6.8 feet (81.6 inches), with a ground clearance of 3.94 inches.
How loud is the Hyster J30-40XNT forklift during operation?
The Hyster J30-40XNT forklift operates at a noise level of approximately 69 dB(A), which is relatively quiet, ensuring a more comfortable working environment for operators compared to internal combustion engine forklifts.
What motor type is used in the Hyster J30-40XNT forklift?
The Hyster J30-40XNT forklift utilizes AC motor technology for both the traction and hydraulic motors. This system provides efficient power delivery and improves the overall performance of the forklift in material handling tasks.